HDPE-Pipe
EX3, PE-80
EX3 (PE-80) is a high density polyethylene with 1-Butene as co monomer . It is natural, good ESCR, good impact strength, tough and rigid pipe resin.
Applications: Industrial and pressure pipe, Gas pipe, drinking water pipe, pressure less pipe, relining, fittings.
| PROPERTY | METHOD | UNIT | VALUE |
|---|---|---|---|
| Mass density (230 °C) | ISO 1183 | g/cm³ | 0.945 |
| Melt Flow Rate (1900 °C/5.0kg) | ISO 1133 | g/10min | 0.45 |
| Melt Flow Rate (1900 °C/21.6 kg) | ISO 1133 | g/10min | 12 |
EX3 , PE 100, CRP100-N
“EX3(PE-100)” is a high density polyethylene with 1-Butene as co monomer. It is Natural, outstanding ESCR, high impact strength, outstanding hydrostatic strength for PE 100 class.
Applications: Industrial and pressure pipe, Gas pipe, drinking water pipe, relining, fittings.
| PROPERTY | METHOD | UNIT | VALUE |
|---|---|---|---|
| Mass density (230° C) | ISO 1183 | g/cm³ | 0.948 |
| Melt Flow Rate (1900° C/5.0kg) | ISO 1133 | g/10min | 0.22 |
| Melt Flow Rate (1900° C/21.6 kg) | ISO 1133 | g/10min | 6.2 |
| Stress at Yield | ISO 527 | MPa | 23 |
CRP-100B
HDPE made via Hostalen process.top quality PE100 pressure pipes for gas and water transportation at higher pressures or with thinner walls as PE-80.
| Test/Composition | Unit | Typical Value | Test Method |
| FRR 21.6/5 | – | 28 | – |
| Density | g/cm³ | 0.946- 0.951 | ISO 1183 |
| MFR190° C/21.6 Kg | g/10min | 6.2 | IS01133 |
| MFR 190° C/5 Kg | g/10min | 0.22 | IS01133 |
HDPE Film
HDPE-7000F
HD-7000F is a high density polyethylene copolymer (with Butene-1 as co-monomer) which is a well- known product for high quality film applications. It has bimodal design of molecular composition and so offers both excellent process ability and superior mechanical properties.
Applications: Enhanced ultra-thin films, Shopping bags, T-shirt bags
| Property | Test Method | Unit | Typical Value |
|---|---|---|---|
| Density (23°C) | ISO 1183 | g/cm³ | 0.952 |
| Melt Flow Rate (190°C/2.16 kg) | ISO 1133 | g/10 min. | 0.04 |
| Flexural Modulus | ISO 178 | MPa | 1200 |
HDPE-EX-5
EX5 License Grade Code HM 9450 F” is a high density polyethylene with 1-Butene as co monomer .It is good stiffness and tenacity, High molar mass.
Applications:Film extrusion, Counter bag, Carrier bag,Wrapping films
| Property | Test Method | Unit | Typical Value |
|---|---|---|---|
| Density (23°C) | ISO 1183 | g/cm³ | 0.949 |
| Melt flow rate (MFR) (190°C/5 Kg) | ISO 1133 | g/10 min. | 0.28 |
| Melt Flow Rate (190°C/2.16 Kg) | ISO 1133 | g/10min | 8 |
| Stress at Yield Point | ISO 527 | MPa | 24 |
HFI-5110
HFI5110 is a high molecular weight, high density polyethylene, which has a broad molecular weight distribution and high melt strength. This product specially designed for producing thin films with excellent strength and rigidity.
APPLICATIONS: Blown film extrusion, high strength grocery sacks, shopping bags and high quality thin films for uni/multi-wall packaging. Films produced with this product can be readily treated and printed to give high quality graphics.
| Property | Typical Value | Unit | Test Method |
|---|---|---|---|
| Physical Properties | |||
| Density (23°C) | 951 | kg/cm³ | SO 1183 |
| MFI (190 °C /21.6Kg) | 10 | dg/min | SO 1133 |
HDPE Injection
HD-6070EA
HD6070EA is high density polyethylene copolymer containing butene-1(C4) as comonomer with medium content of light stabliser additive.It is suitable for general purpose injection moulding items.
HD6070EA has the following characteristics: good impact strength,easy processing,high warpage resistance,high rigidity
This grade has food contact approval.
Applications: crates,boxes,seats
| Property | Unit | Test Method | Value |
|---|---|---|---|
| Melt flow rate(2.16 Kg) | g/10 min | ISO 1133 | 7.5 |
| Density | Kg/m3 | ISO 1183-2 | 960 |
| Tensile strength at yield(MD/TD) | MPa | ISO 527 1&2 | 31 |
| Elongation at break(MD/TD) | % | ISO 527 1&2 | >1000 |
| Charpy impact resistance | KJ/m2 | ISO 179/A&B | 6 |
HD-52518
HD-52518 is a HDPE co-polymer which manufactured by gas phase process. This grade is LLDPE Injection molding, extrusion coating & roto-molding. Injection molding for application requiring a good balance between easy of process-ability and flow-ability and mechanical properties are the special purpose of this grade
| Property | Unit | Typical Value | Test Method |
|---|---|---|---|
| Melt Index | g/10 min | 18 | D-1238 |
| Density | g/cc | 0.952 | D-1505 |
| Vicat Softening Point | °C | 122 | D-1525 |
| Flectural Modulus | Mpa | 1350 | D-790 |
| Notched Izod Impact @ 23 °C | J/m | 25 | D-256/A |
Application: Housewares, High fluidity.
HD-52505/UV
52505 is a HDPE co-polymer which is manufactured in gas phase process. This grade is an injection molding grade for applications requiring a good physical property even at low temperatures, like pails, containers and technical moldings.
| Property | Unit | Typical Value | Test Method |
|---|---|---|---|
| Melt Index | g/10 min | 5 | D-1238 |
| Density | g/cm³ | 0.952 | D-1505 |
| Vicat Softening Point | °C | 124 | D-1525 |
| Flectural Modulus | Mpa | 1200 | D-790 |
| Tensile Strenght at Yield | Mpa | 27 | D-638 |
| Tensile Strenght at Break | Mpa | 18 | D-638 |
| H.D.T | °C | 240/400 | D-1922 |
| Notched Izod Impact @ 23 °C | J/m | 55 | D-256/A |
Application: Containers
HDPE Blow Moulding
HD-BL3
HF-4760(BL3) is a blow molding grade resin with high density polyethylene with 1-Butene as co monomer which is manufactured by the suspension polymerization of ethylene monomer. Stiffness, good ESCR are it’s spatial properties. High rigidity and good flow-ablity which made it proper for usage in bottles and small blow molding goods.
| Properties | Unit | Value | Test Method |
|---|---|---|---|
| Melt Index (21.6) | g/10 min | 23±4 | ISO 1133 |
| Melt Index(5) | g/10 min | 1.2±0.3 | ISO 1133 |
| FRR (21.6/5) | 19±3 | ||
| Density | g/cm³ | 0.954±0.002 | ISO 1183 |
| Notched Impact @ 23 °C | mJ/mm² | 9 | ISO 179/ 1 eA |
Application: Small blow molding, Bottles, Containers (up to 5 lit ), Packing of pharmaceuticals & surfactants.
HB-0035
| Property | Test Method | Value | Unit |
|---|---|---|---|
| MFI (190°C/2.16 KG) | ASTM D-1238 | 0.7-1.5 | gr/10 min |
| DENSITY | ASTM D-1505 | 0.953-0.959 | gr/cm3 |
| IZOD Impact Strenght | ASTM D-256 | 14 min | kg.cm/cm |
| Tensile Strenght @Break | ASTM D-638 | 290 min | kg/cm2 |
| Elongation | ASTM D-638 | 900 min | % |
| Yellow Index | ASTM D-1925 | 4 max | – |
| Ash Content | ASTM D-1063 | 0.06 max | wt.% |
| Volatile Matter | ASTM D-1960 | 0.05 max | wt.% |
Application: detergent,toys & household