Linear Low-Density Polyethylene

• 

• 

• 

• 

LL-0209 AA /KJ

Typical properties	Test method (ASTM)	Unit	Value
Resin
MFI@190°C, 2.16 kg	D-1238	gr/10min	0.9
Density	D-2839	gr/ml	0.920
Vicat Softening Point	D-1525	°C	100
Film
Tensile Strength@Yield, MD/TD	D-638	MPA	10.5/11
Elongation@Break, MD/TD	D-638	%	620/840
Tensile Strength@Break, MD/TD	D-638	MPA	41/32
Tear Strength, MD/TD	D-1922	gr/25mic	145/370
Impact Strength, Dart	D-1709	gr	150
Haze	D-1003	%	10
Gloss (45°)	D-2457	Rating	56

Application: general purpose films, neat or in lean blends with LDPE and other ethylene polymers. Lean blends applications include
sacks of all types, FFS and agricultural films.

LL-0220 AA

Property	Unit	Typical Value	Test Method
Melt Flow Rate(MFR) (190°C/2.16Kg) (190 °C/5Kg)	g/10min	2.2	ISO 1133
Density	g/cm3	0.920	ISO 1183
Impact Strength	gr	130	ASTM D-1709
Tear Strength MD/TD	g/25μ	110-300	ASTM D-1922
Yield Stress MD/TD	Mpa	10-11	ISO 527
Tensile Strength MD/TD	Mpa	28-36	ISO 527
Elongation at break MD/TD	%	600-800	ISO 527
Vicat Softening Temperature	°C	93	ISO 306

Application: Light and medium duty film, Stretch film

LL-22501

Property	Unit	Value	Test Method
density	g/ml	0.922	ASTM D-1505
MFR(190°C/2.16 kg)	g/10 min	0.95	ASTM D-1238
Dart Impact	g	80	ASTM D-1709
Elemendorf Tear MD/TD	g	105/460	ASTM D-1922
Tensile strength at yield MD/TD	Mpa	13/12.5	ASTM D-882
Tensile strength at Break MD/TD	Mpa	45/30	ASTM D-882
Ultimate Elongation MD/TD	%	680/780	ASTM D-882
2% Secant modulus MD/TD	Mpa	200/240	ASTM D-882
Haze	%	21	ASTM D-1003
Gloss 45°	%	38	ASTM D-2457

Application: Blown film grade

LL-0205 KJ

Properties	Unit	Typical Value	Test Method
MELT FLOW INDEX(200°C-5 KG)	g/10min	0.5	ASTM D-1238
DENSITY	gr/cm3	0.920	ASTM D-1525
VICAT SOFTENING POINT	°C	105	ASTM D-1525

Application: green house film, silage film, heavy duty plastic bags, hand bags and general purpose film applications.